HydrauSupport 250C

HydrauSupport 250C
Max Q
Max P

The HydrauSupport 250C is an electric driven cooling unit, fitted with a 5,5 kW electric motor.

The HydrauSupport 250C can be used to cool down a hydraulic system with a maximum cooling capacity of 250 kW at a temperature difference of 40 °C and an oil flow of 600 liter/min. If no sufficient oil flow is available, the HydrauSupport 250C has also the possibility to use an oil circulation pump with an output flow of 440 liter/min. This integrated device gives the HydrauSupport 250C a cooling capacity of 220 kW at Δ T of 40°C.

The HydrauSupport 250C is provided with a temperature controlled frequency drive. The higher the inlet oil temperature, the higher the fan speed. At an inlet temperature less than 40°C , the fan is in standstill, at a temperature range of 40°C up to 50°C the fan speed increases from 30 to 100%.

The system is designed to be robust and reliable. The HydrauSupport 250C is mounted in a box frame provided with lifting lugs and integrated forklift-trays to ensure easy handling.A 5 ft container version is also available.


Temperature controlled fan speed.
Easy to change temperature set point.
Integrated circulation pump for off-line cooling.
Piping connection for in-line cooling.
Possibility to use in combination with a HydrauSupport or HydrauPack.